Joined in 2023 
82 
63 About this deal
The phankteks Enthoo Elite is their best Case ever, I built My PC with that case, and I can tell you: It worths every dollar. There are magnetic dust filters at the top front, side and bottom of the case which make for easy cleaning. Mi montaje incluye una RL de 280 arriba lo más pegada posible al frontal (lo que den los tubos), se supone que arriba son de 240mm o 360 y no 280 pero se puede. Otra AIO en el lateral de 240mm (para la APU) 3 ventiladores en el frontal y uno arriba junto a la AIO encima de las VRMs y otro en la parte trasera, todos de 140mm para que sean más silenciosos. Supongo que abajo pondré alguno más metiendo aire para aprovechar el filtro de abajo. PHANTEKS has also taken traditional air cooling into consideration, enabling the installation of up to x15 120 mm fans. The front has space for four 120- or three 140 mm models, while the rear and roof supports 140- or 120 mm case fans. The motherboard tray supports four 120 mm fans and the bottom of the case allows for three 120- or 140 mm fans. CPU coolers may be up to 195 mm tall. Fan Hub and RGB-LED Lighting
The rear of the case supports a single 140- or 120 mm model fan. A radiator up to 480 mm can fit onto the motherboard tray. The right side wall offers multiple openings to help improve overall airflow. The bottom of the case on the other hand supports a 360 mm radiator. The roof and the front of the case include openings for fill- and drain ports each with a diameter of 20,5 mm. The Luxe 2 cools very well. Clearly the exact figures depend on your chosen PC build(s) and the level of cooling you install however the case flows air very nicely. There are decent openings in the floor, front, side and roof with filters at all those points. If you push your system to the absolute limit you might find it necessary to remove the air filters to increase air flow however we consider this to be most unlikely. Closing Thoughts When it comes to hard drives, Phanteks offers tons of possibilities. Included with the chassis are four HDD caddies, which you can also hang from the side of the case in pairs of two. These are incredibly easy to hang up here, as they just slot into place, but they rely fully on gravity to keep them in place. As such, we would only install drives here if you have absolutely no intention of moving your system. In a car, it’d only take one bump for them to drop out of place and fall down, which isn’t something you want happening with your hard drives. This is an intelligent and well designed case that is aimed squarely at the enthusiast who needs more than a mid-tower ATX model. It fills a significant space in the market and scores a solid hit where a number of other companies have had noticeable misses.It’s already been six years since the first version of the Enthoo Luxe made its debut on the market. After certain events, Phanteks had decided to change the name from Luxe 2 to “Enthoo 719” to spend less time on a problematic matter and concentrate on creating innovative products for users instead. Compared with the original Luxe, there are quite many changes in this new case. Most of them correspond to evolving market trends. For example, you won’t find any 5.25” drive bays here (at least ones that are accessible from the outside), the only USB ports are four 3.0 ones (instead of just two), and there’s also a USB 3.1 Type-C connection here. This time there are no pre-installed fans. On the one hand, this is a good move considering the needs of the typical user of this chassis – I’m talking about the custom liquid cooling guys who would most probably swap any included fans for their favorite ones anyway. On the other hand, this hasn’t necessarily brought the price down. And you still need to buy fans if you want to use the chassis even for a simple, air-cooled system. But not all changes have been for the worse. Now, you get some subtle aRGB strips along with the chassis (these can be synchronized with your motherboard manufacturer’s software, like Asus Aura, etc). You can also mount up to two 480 mm radiators inside. Dual-system and dual-PSU support are here as well.
Fan mounts: 4x 120mm/3x 140mm front, 3x 120mm/140mm roof, 1x 120mm/140mm rear, 3x 120mm/1x 140mm floor, 4x 120mm side.that fits inside the top right corner of the case for easy access (Note you will lose the ability to fit two fans or drives behind this bay). Buyer's Remorse - Authorization to return the unit must be made within 30 days from receipt of product. KitGuru says: Luxe 2 is excellent. If the steelwork was slightly more rugged it would deserve 9.5 marks but as things stand it is gets a solid 9 and huge amounts of our admiration. There is a super useful fan hub at the top of the right side of the case making it very easy to route fan cables and the rubber lined spaces inside the case make it super easy to route cables away from the inside which really helps to look neat and tidy.
I would refuse to pay that price for your nice case, that's just ridiculous, but if you have the cash, then why not. To put this case through its cooling paces we will be using a test system consisting of an Intel Core i9-7920X, RTX 2080 Founders Edition and an SSD. This system allows us to produce a substantial amount of heat and effectively test the Phanteks Enthoo Luxe 2‘s cooling capabilities.Front I/O: 1x USB 3.1 Type-C Gen2, 4x USB 3.0, Microphone, Headphone, Reset Button, D-RGB Mode button, D-RGB Color Button Phanteks today announced that they will be changing their Enthoo Luxe 2 product name to “Enthoo 719”. Phanteks recently received a letter from Thermaltake suggesting that the Enthoo Luxe 2 product name has similarities to their “Luxa 2” mark, a mobile accessory brand. Phanteks strongly disagrees with this finding as the Luxe 2 is simply an iteration of the original, a computer chassis. Phanteks never had the intent to cause confusion by using the name described. If you want to use an air cooler on your CPU, the max height is 195 mm (all products on the market will fit). GPUs up to 503 mm in length are supported, whereas the PSU size limit is not defined (but based on practice you can go up to 200 mm). The case is available in two colour variants: The dimensions are what you might expect from a full-tower chassis, which means that the case is simply huge. It supports ATX, EATX, uATX, mini ITX, and SSI EEB motherboards. The weight is 14.3 kg, as the case has one big and one small tempered glass panel (the latter on the right-hand side). According to the specs, you can fit up to eleven 2.5”/twelve 3.5” drives inside (four trays for 3.5” drives are included). As I mentioned before, you will find the following ports on the front: There is a difference though, what I was referring to was that the Xilence is also a Dual Computer Case, similar to the Phanteks’ Enthoo Pro II and IMO the Xilence wins hands down as a dual computer case. The Xilence is much better than photographs show it as, and weighs an absolute ton, the quality is there.
Great Deal 
New Comment